How to Use a Kindle DX as a PC Display - byrdheizieray

Compared with else Kindle models, Amazon's Kindle DX is gargantuan. Its 9.7-inch E Ink block out provides wide-cut space for reading books and viewing graphs and images. But what if you could use all of those E Ink pixels for something to a greater extent original, much atomic number 3 displaying your Windows desktop? A IT turns out, with a few simple tricks you can usage the Kindle DX as a computer display that can show anything your usual monitor can show. (Granted, E Ink's grayscale showing can't perform or refresh equally quickly As a color LCD can, so you'Ra record-breaking off using this screen for static content such as documents surgery WWW pages.)

In this guide I'll explain how to doh it. First, all the same, some credit where credit is due: People originally showcased this method on TinyApps.org, demonstrating the procedure on a Mac. After working with those folks, I was well able to apply it to Windows 7 as well. Setting your Elicit DX up A a second monitor is a great trick, but it also can be useful in situations where silver screen glare on your daily monitor is hurting your eyes.

Ingredients

To get started, you need a Kindle DX, its USB wire, and a PC. You also call for a few software components:

Kindle-jailbreak-0.10.N.ZIP code, from the MobileRead Forums
Kindle-usbnetwork-0.37.N.zip, from the same MobileRead thread
Kindle VNC Looke
TightVNC, a VNC server
PuTTY or another Telnet client

Breakout Your Kindle DX

Obviously you're astir to do something the Kindle DX wasn't meant to behave out of the box. To pull round smart enough for this trick, you have to prison-breaking information technology. Jailbreaking is a pretty painless procedure. Start by connecting the Kindle DX to your computer and waiting for Windows to bestrid IT as a USB storage device (this should happen automatically after a moment). Next, from Kindle-jailbreak-0.10.N.zip, extract the file called update_jailbreak_0.10.N_dxg_install.bin. Place this filing cabinet in the root of your Kindle (non in the documents brochure).

Next, disconnect the Kindle DX from the computer. Switch it along, and then voyage to the Inflame Settings menu by selecting Menu > Settings. Within the Settings screen, press Menu again, and prime the Update Your Enkindle option. Press out the five-style controller to begin the update process, and the Kindle DX will pop functioning a confirmation prompt; press OK, and the update will begin.

Important: The update testament now fail, and show a warning to that effect. Don't worry, this is normal; the prisonbreak software placid worked, and everything is satisfactory. At this point, your Kindle should now boot itself.

Install USB Networking

Once the Kindle DX reboots, connect it to your computer again and mount information technology atomic number 3 a USB storage device. Next, open Conflagrate-usbnetwork-0.37.N.zip and extract the file called update_usbnetwork_0.37.N_dxg_install.bin. Place update_usbnetwork_0.37.N_dxg_install.bin into the Kindle's root directory, then repeat the rooting procedure I outlined above to install the USB Networking file on the Kindle.

Install the Fire VNC Viewer

With USB Networking installed (but not yet active), connect the Arouse DX to your computer again, mounting it as a USB storage device. Unzip kindlevncviewer.zip, and drag the kindlevncviewer folder into the antecedent folder of the Kindle.

Install and Configure TightVNC Server on the Microcomputer

You're done with the Kindle DX, and now IT is time to localise things up on the PC. First, install TightVNC and run the TightVNC Server application. Next, right-click the TightVNC system tray icon, and open the Configuration menu.

Change the 'Main server port' to 5901, and uncheck the Require VNC assay-mark option. Click Hold or O.k., then will TightVNC Server running.

Start Networking on the Kindle DX

You are now intelligent to start USB networking on the Kindle DX. If the e-reader is still contiguous to the PC, disconnect it and navigate to its home screen. Next, tap the Del key on the Kindle DX keyboard. A prompt testament appear. Character ;debugOn and press Go back. Bank bill the semicolon at the beginning of the command; you can make it by using the Sym key. Next, tap Del again. Type `usbNetwork and press Return. This command starts with a backtick, which you also produce via the Sym key. Make sure that information technology's a backtick, non a single quotation mark. In one case you have that, hydrant Del one last time. Case ;debugOff and pressur Recurrence.

Great job! Your Kindle DX is now ready to create a virtual network with your PC, over the USB connection. Use the USB cable to connect the Kindle DX to the PC.

Configure Networking on the Microcomputer

When you connect the Kindle DX now, Windows will not mount information technology Eastern Samoa a USB storage twist. Instead, Windows will put in a new driver for it. This physical process takes a moment, but does non require any intervention on your part. Simply wait until you get a line 'Ready to use' nonclassical up on the screen. When that appears, it is time to configure this inexperient connection on your Microcomputer. In Windows 7, voyage to the Network Connections menu by opening Master Panel > Network and Internet > Network Connections, and place the 'USB Ethernet/RNDIS Gadget' connection. Right-click that connection and select Properties; then, inside the properties list, scroll pull down to 'Net Protocol Version 4 (TCP/IPv4)'. Clear the Properties menu, select Use the chase IP address, and enter 192.168.2.1 for the address and 255.255.255.0 for the netmask. Click Satisfactory, and then click OK again to close the link properties window.

Establish a Telnet Connection

Now you have to link up to the Evoke DX from the computer, and control it via Telnet. Move the PuTTY application (or your Telnet app of choice) and prepare a new-sprung connexion. Since this wish be a Telnet connection, select Telnet subordinate connection type (instead of SSH, which is the default). You want to connect to 192.168.2.2 (which is your Kindle DX), port 23. With those Telnet session settings in situ, click Open. You should see a welcome dialogue box signaling a successful connection.

Adjust Orientation and Bulge out VNC Viewer on the Kindle DX

To whip your Kindle DX into shape A an auxillary PC reveal, tap the Kindle's aA release and reorient the screen so that it is crosswise (like your computer monitor). Make sure that TightVNC Server is still running connected the computer–you testament beryllium copulative to it in a moment.

Using your Telnet client (PuTTY or your app of pick), send the commands highlighted in bold below: